A pad sized to whatever sits on it and built for the ground under it: reinforced for the load with the steel kept covered, and drained so a shallow water table and storm rain leave it alone.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete pads & slabs job.
We grade and compact the base over the Coastal Bend's sand and clay so the slab carries weight evenly and won't settle once a load lands on it, even where groundwater runs close to the surface.
Slab depth follows whatever goes on top. A shed pad and a shop floor that takes vehicles are not remotely the same pour.
Reinforcement is chosen for the use, from mesh on light pads to a rebar grid for heavy loads, and we hold proper cover over it so salt air has less reach to the bars.
For enclosed or heated slabs we set a vapor barrier against the moisture a shallow water table pushes up, and we grade the area so storm water drains off rather than soaking into the base.
We pour the mix, cut the control joints, and cure with coastal heat and humidity in mind so the slab sets evenly across the surface.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete pads & slabs, that starts with prepping the base for coastal soil.
Pads and slabs price to the load and the ground: reinforcement matched to the use and kept covered against salt, a compacted base over coastal soil, and grading so water drains off. As an opening range, most pads and slabs start around $7 to $13 per square foot, depending on thickness and whether a vapor barrier is called for. We size and price it to the load that pad will carry.
That tracks the load. A shed pad is a fraction of the weight of a garage or shop floor holding vehicles and gear, so we match the thickness and reinforcement to your real use and account for the mixed soil and shallow water table beneath it.
Yes. Those are heavy, concentrated loads, so we step up the thickness and the reinforcement. A hot tub also needs a level base that won't shift as coastal ground wets and dries, which makes drainage matter as much as the steel. Tell us the equipment and we build the pad to suit it.
For enclosed or heated slabs, usually yes, because a shallow coastal water table and damp ground drive moisture up through concrete. We make that call based on what the slab is for.
Some do, depending on size, placement, and use, and the rules vary across the city and the surrounding Coastal Bend jurisdictions. We flag when a permit is likely so it gets sorted up front rather than turning up later.
Concrete keeps gaining strength well past the point it looks done, and humid coastal air can slow those first days. We give you a clear load-on date set to the conditions your slab was poured and cured under.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (361) 326-5044